CARVIN 973224 Series Скачать руководство пользователя страница 19

CARVIN

®

 GOLD SERIES OVAL POOL | USER MANUAL

19

USE OF A WINTER COVER

STEP 1

For the use of a winter cover, we recommend you ask your local dealer for 

information. Since many types of winter covers are available, your dealer can advise 

you on the best installation for your pool.

Never leave water in the filtration system. It must be drained freezing of water in 

the system could damage the components.

Never let water accumulate in the skimmer during freezing periods. It could dam

-

age the skimmer and the pool wall could collapse.

 

The pool is designed to support the weight of water in a horizontal way. Make sure 

to remove any amount of snow over 12” (30 cm) on the structure of the pool 

(top ledges).

During winter, do not hit a pool filled with frozen water. This could damage the pool. 

Never climb on a pool (frozen) during winter. This could move the ice and damage 

the liner and the pool structure.

SPRING OPENING

As soon as the exterior temperature reaches 10°C (50°F) and the pool water is 

completely unfrozen, it is time to restart your filtration system on your pool.

STEP 1

Clean your winter cover from any water accumulation, leaves or any dirt that would 

have dropped on top of your cover. Take off your winter cover from your pool.

STEP 2

Reposition your filtration system in place and reconnect the hoses to the skimmer 

and water return.

STEP 3

Fill the pool with water so that the level reaches the middle of the skimmer.

Check your pool to make sure there is no apparent rust or leaks, specially around 

the skimmer and water return. If you see a problem, proceed with repairs as soon 

as possible.

STEP 4

Clean the bottom of the pool by vacuuming the leaves and dirt. Set the filter to 

“DRAIN” to clean without the water having to go through the filter. By setting

 

to “DRAIN” the sand in your filter will stay clean and delay the “CLEAN” operation

 

to later.

Do not empty water completely from the pool unless it is necessary. If you must do 

so, do no leave the pool empty for a long period. A sun exposed liner can shrink and 

dry. The structure can also move if very windy condition occur making it 

very dangerous.

STEP 5

Adjust the water parameters of your pool. Contact your local dealer for recommen-

dation on various chemical products to be added in the water for the season open-

ing of your pool.

Make sure the skimmer and water return do not leak. Any leaks could rust the wall 

and seriously damage the structure of your pool.

Never pour chemical products through the skimmer. This could cause major 

problems and long term damage to your filtration system.

Содержание 973224 Series

























Отзывы: