CARVIN
®
GOLD SERIES OVAL POOL | USER MANUAL
15
C
DETAIL C
SCALE 1 : 10
D
DETAIL D
SCALE 1 : 5
E
1/2'' (13mm) HEX SOCKET
P/N 14072620
Max torque 8.5 N*M (6.3 ft-lbs)
P3 - PHILLIPS DRIVE
P/N 14172209
Max torque 6.3 N*M (6.3 ft-lbs)
7/16'' (11mm) HEX SOCKET
P/N 14455075
Max torque 7.5 N*M (5.5 ft-lbs)
7/16'' (11mm) HEX SOCKET
P/N 14455085
Max torque 7.5 N*M (5.5 ft-lbs)
P3 - PHILLIPS DRIVE
P/N 14455025
Max torque 4 N*M (3 ft-lbs)
Drill at low speed
P3 - PHILLIPS DRIVE
P/N 14455032
Max torque 4 N*M (3 ft-lbs)
Drill at low speed
3/4'' (19mm) HEX SOCKET
P/N 94819A149
Max torque 66 N*M (49 ft-lbs)
3/4'' (19mm) HEX SOCKET
P/N 14455035
Max torque 66 N*M (49 ft-lbs)
P/N 91922A308
P3 - PHILLIPS DRIVE
P/N 14433700
Max torque 3 N*M (2 ft-lbs)
Drill at low speed
P/N 14073852
P3 - PHILLIPS DRIVE
P/N 14455025
Max torque 4 N*M (3 ft-lbs)
Screw at low speed
TOP LEDGE COVER INSTALLATION
STEP 1
Pre-assemble front (interior) and back (exterior) top ledge covers until you hear the
first click.
A
STEP 3
Before screwing top ledges, pull them towards the exterior of the pool so that the
corners on the interior of the pool are pressed and flush against top plates.
STEP 2
Insert the rear part of the top ledge covers (hook) under top ledge and turn the top
ledge cover assembly downwards.
C
DETAIL C
SCALE 1 : 10
D
DETAIL D
SCALE 1 : 5
E
C
DETAIL C
SCALE 1 : 10
D
DETAIL D
SCALE 1 : 5
E
Make sure the round hole is in the screwing zone.
Screw top ledges with 2 screws (14455025) on each side. Use the outermost holes to
screw on the top ledges.
Many holes are on the top plates for assembly, use the one that seems best located
for your installation.
A
STEP 3
Hold the rear part of the top ledge cover against top ledge (interior of the pool) and
push on the front part (exterior of the pool) of the top ledge cover so that the shape
of the top ledge cover is pressed and flush with top ledge.
STEP 4
Line up the center slot of top ledge cover with the center hole of top plate.
Screw together using screw 14455032.
A
1/2'' (13mm) HEX SOCKET
P/N 14072620
Max torque 8.5 N*M (6.3 ft-lbs)
P3 - PHILLIPS DRIVE
P/N 14172209
Max torque 6.3 N*M (6.3 ft-lbs)
7/16'' (11mm) HEX SOCKET
P/N 14455075
Max torque 7.5 N*M (5.5 ft-lbs)
7/16'' (11mm) HEX SOCKET
P/N 14455085
Max torque 7.5 N*M (5.5 ft-lbs)
P3 - PHILLIPS DRIVE
P/N 14455025
Max torque 4 N*M (3 ft-lbs)
Drill at low speed
P3 - PHILLIPS DRIVE
P/N 14455032
Max torque 4 N*M (3 ft-lbs)
Drill at low speed
3/4'' (19mm) HEX SOCKET
P/N 94819A149
Max torque 66 N*M (49 ft-lbs)
3/4'' (19mm) HEX SOCKET
P/N 14455035
Max torque 66 N*M (49 ft-lbs)
P/N 91922A308
P3 - PHILLIPS DRIVE
P/N 14433700
Max torque 3 N*M (2 ft-lbs)
Drill at low speed
P/N 14073852
P3 - PHILLIPS DRIVE
P/N 14455032
Max torque 4 N*M (3 ft-lbs)
Screw at low speed
CLIC!
