Carter Talon GSR 150 R2, Руководство пользователя

Страница: 24 / 69

21
Figure 13
REPAIR
A. Front Wheel Replacement
Do not disassemble the castle nuts when you replace the front wheels.
It is only necessary to remove the 4 lug nuts to remove the wheel. (See Fig. 12)
Tighten the nuts after replacing the wheels.
Figure 12
B. Rear Wheel Replacement
Do not disassemble the castle nuts when you replace the rear wheels and hub assembly.
Remove the Cotter Pin and then 24mm nut. Then slide off wheel and hub assembly.
It is only necessary to remove the 4 lug nuts to remove the wheel by itself.
(See Fig.13)