Carter Talon GSR 150 R2, Руководство пользователя

Страница: 23 / 69

H. Chain Adjustment
Check the chain adjustment after first two hours of use. Readjust if it has more than 1/2” flex.
a . Loosen Nut #1.
b . Adjust Nut #2. Turn Nut #2 clockwise in 1/2 turn increments, then turn nut #1 until tight.
Follow this procedure until chain is at proper tension (See Fig. 10).
c . Repeat the above two steps until chain is adjusted to desired fit.
I. Adjustment of Front And Rear Shock
There are five adjustable positions on each shock.
The default position is in the middle and is set by
the manufacturer (See Fig. 11).
Use a round nut wrench as you adjust the
shock, the tension of the shock spring will
increase as you screw to left, decrease as you
screw to right. Adjust according to the
weight of the riders.
J. Storage Instruction
In the event your kart is not to be operated
for a period in excess of 30 days, or, at the end
of each driving season, prepare for storage as
follows:
a . Drain fuel tank and carburetor by allowing engine to run out of fuel, and use a fuel stabilizer.
b . Lubricate engine cylinder by removing the air cleaner, then spray engine fogging oil through
the carburetor until motor dies.
c . Do not save or store gasoline over winter. Using old gasoline, which has deteriorated from
storage, will cause hard starting and affect engine performance.
20
Figure 11
SPRING ADJUSTMENT CAM
RIGHT ROTATE
LEFT ROTATE
SERVICE INSTRUCTIONS
Do not drain fuel while engine is hot. Be sure to move Kart outside before draining fuel.
WARNING
WARNING