Version 18.11.2015
Pa
ge
14
2.5.3.1.
Audio insertion by factory audio AUX - NO factory media-interface in vehicle
On vehicles without factory media interface, the physical audio AUX input on the Quadlock
connector can be used for audio inser
ti
on. The interface’s harness has female RCA connector
for this case.
Note:
If there is no op
ti
on “AUX” in the audio menu of the Comand, it is necessary to code
the Comand to AUX by diagnosis computer or with our product OBD-N45-X-01.
Connect female 7pin connector of the audio cable to male 7pin connector of the
video-interface.
Connect the audio-RCA of the possibly exis
ti
ng factory AUX-input or the FM-
modulator to the female RCA port AV-Out of the audio cable.
Connect the audio-RCA of the AV-source 1 to the female RCA port AV1 of the audio
cable.
Connect the audio-RCA of the AV-source 2 to the female RCA port AV2 of the audio
cable.