Version 18.11.2015
Pa
ge
10
2.4.
Connections to the head-unit
Remove head-unit.
Remove the female Quadlock connector of the vehicle harness from the rear of the
naviga
ti
on computer.
Remove op
ti
cal leads –if exis
ti
ng- from the female Quadlock connector of the vehicle
harness and insert them into the female Quadlock connector of Quadlock harness at
the same posi
ti
on.
Connect female Quadlock connector of vehicle harness to the male Quadlock
connector of Quadlock harness.
Connect female Quadlock connector of Quadlock harness to the male Quadlock
connector of the head-unit.
2.5.
Connecting peripheral devices
It is possible to connect an a
ft
er-market RGB naviga
ti
on (or other RGB video source), 2 a
ft
er-
market AV-sources and an a
ft
er-market rear-view camera to the video-interface.
Before final installation of the per ipheral devices, we recommend a test-run of the
interface. Due to changes in the production of the vehicle manufacturer is always the
possibility of incompatibility.