Carson X-18 Pro, Инструкция по эксплуатации, Страница: 28 / 56

28
GB
CARSON X-18 Chassis 500 500404047
Trouble Possible reason Solution
After power on, motor doesn’t work The connections between battery pack and
ESC are not correct Check the power connections
Replace the connectors
After power on, motor doesn’t work, but
emits “beep-beep-, beep-beep-” alert tones
(Every group of “beep-beep-” has a time
interval of 1 second) Input voltage is abnormal, too high or too
low Check the adjustment of the voltage of the
battery pack
After power on, red LED always lights, the
motor doesn’t work Throttle signal is abnormal Plug the receiver wire into the throttle
channel of the receiver correctly
The motor runs in the opposite direction
when it is accelerated The wire connections between ESC and the
motor are not correct Swap any two wire connections between the
ESC and the motor
The motor suddenly stops running The throttle signal is lost Check the transmitter and the receiver
The ESC has entered the “Low voltage
protection mode” or “Over-heat protection
mode” Red LED flashing means “Low voltage
protection”. Please replace battery pack.
Green LED flashing means “Over-heat
protection”, please stop running to cool the
ESC.
When accelerating quickly, the motor stops
or trembles 1. The battery has a bad discharge
performance Use a better battery
2. The “Start mode (Punch)” of the
ESC is too aggressive
Select a softer option for the “Start mode
(Punch)”
Trouble shooting ESC Brushless
f. Loading Battery
Attention:
Only use the specially provided charger units to charge the nickel
metal hydride batteries!!!
Otherwise your drive battery could be damaged.
The charging time will vary according to the charger unit and battery
type.