SA-441 Installation and Operating Instructions Page 5
11/6/01 CP4816A
INSTALLATION
Proper installation of the unit is essential for years of safe, reliable operation. Please read all
instruction
before
installing the unit. Failure to follow these instructions can cause serious
damage to the unit or vehicle and may void warranties.
SAFETY PRECAUTIONS
For the safety of the installer, vehicle operator, passengers and the community please
observe the following safety precautions.
Failure to follow all safety precautions and
instructions may result in property damage, injury or death.
Qualifications -
The installer must have a firm knowledge of basic electricity, vehicle
electrical systems and emergency equipment.
Sound Hazards
- Sound levels produced by attached speakers can cause permanent hearing
loss. Never operate this unit without adequate hearing protection for you and others in the
area. (OSHA 1910.95)
Mounting
- Mount the control head for easy access by the vehicle operator. DO NOT mount
in air bag deployment area. Assure clearances before drilling in vehicle.
Wiring
- Use wiring capable of handling the current required. Make sure all connections are
tight. Route wiring to prevent wear, overheating and interference with air bag deployment.
Install and check all wiring before connection to vehicle battery.
Testing
- Test all siren functions after installation to assure proper operation. Test vehicle
operation to assure no damage to vehicle.
Keep These Instructions
- Keep these instructions in the vehicle or other safe place for
future reference. Advise the vehicle operator of the location.
UNPACKING
Inspect contents for shipping damage. If found
alert carrier immediately
. Contents should
include control head with attached microphone, amplifier, control head wiring harness,
removable pressure connector, microphone bracket with 2 screws and these instructions.
Contact supplier immediately if any components are missing.
Note:
On “FX” units the microphone is detached and a microphone extension cable with
connectors is additionally supplied.
AMPLIFIER ELEMENTS
(2) Fuses
15A MAX
Connector
Radio
Adjust
Option
Switches