SA-441 Installation and Operating Instructions Page 3
11/6/01 CP4816A
SPECIFICATIONS
Input Voltage
11 - 16 VDC (negative ground)
Input Current
17 AMPS (@14.0 VDC - dual 100W speakers)
Standby Current
Less than 250 mA
Audio Frequency
200Hz - 10 kHz + 3db
Audio Distortion
Less than 3% (@1 kHz - dual 100W speaker)
Audio Output
80 watts (@14.0 VDC - dual 100W speaker)
Audio Input
400 ohms + 10%
Output Power
210 WATTS RMS MAX. (15.0 VDC - dual 100W speakers)
Siren Frequency
700Hz - 1500Hz (Two-Tone and Horn = 435 & 585Hz)
Tones / Cycle Rates Horn Wail Yelp Phaser Two-Tone
109 CPS 13 CPM 190 CPM 15 CPS 60 CPM
High Voltage
Protection
16 - 18 VDC will cause siren output to cease, resume at normal
Short Circuit Current 50 AMPS (supply circuit must be capable of supplying this)
Operating
Temperature
-15° F to +140°F
Controls
6-position rotary mode switch (Phaser/Wail-Yelp, Yelp, Wail, Manual,
Horn/Two-Tone and Radio).
Dual siren control toggle switch.
Momentary push-button Siren switch.
Front panel mounted PA volume control, Radio adjust on amplifier
Auxiliary input for positive or negative connection.
8-position DIP switch option selector.
Connections
(10-Pin Conn)
(2) Positive, (2) Negative, (3) Speaker, (2) Radio, Control
Size
Control Head: 6-1/4" W x 2-7/8" H x 1" D
Amplifier: 8” L x 6-3/4” W x 2-1/8” H
Weight
6 LBS.
NOTICE
Due to continuous product improvements, we must reserve the right to change any specifications and
information, contained in this manual at any time without notice.
Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not
limited to, the implied warranties of merchantability and fitness for a particular purpose.
Carson Manufacturing Co., Inc. shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this manual.