30
GB
CARSON Sbach 342 • 500505023
Connect the elevator and rudder servo clips. Use the outermost hole
on the output arm.
Make sure the screw is firmly fastened to avoid any incident.
Then attach the spinner using the enclosed screws
(2 countersunk screws).
13
16
14
17
15
Assembly screw
Connecting the servo rod linkage
Propeller
12*6
Front wheel shaft mount
Gasket
Ø 13.4*0.8 mm
Propeller mount
Note approx. 3 mm gap
Nut M6
Spinner