CarShow Installation Guide - Toyota Tundra/Sequoia
CarShow
Copyright 2013 All Rights Reserved
Installation Guide
CS-TUND09-3
Page 6
Mount the GPS and Sat Radio antenna
on the EXTERIOR of the Vehicle
Route the GPS harness away from other power harnesses
in the vehicle.
This will help to ensure optimum performance of the GPS
system.
Install the Optional iPod Video interface
connector in a location accessible to
the end-user
iPod Video cable is connected via rear mounted USB
connections.
Cable P/N: PP1013
INSTALL THE ROSEN NAVIGATION SYSTEM
You will need to prepare the Rosen Navigation System for installation in the vehicle.
STEP
5
Connect the Power and GPS Harnesses
The GPS Harness must be properly seated into connector.
Also be sure steering wheel control connector is securely
connected.
Failure to follow this step may result in poor GPS signal
and steering wheel controls being inop.
Connect Optional Harnesses such as
iPod, Satellite Radio, Camera
These harnesses must be fully engaged prior to the system
installation.
See the Main Harness Diagram below for more information
Turn the vehicle ON and confirm the
unit is fully operational
With the connectors
Fully Engaged
, turn the vehicle
on and press the
RESET
located behind SD card
access door.
