CarShow Installation Guide - Toyota Prius
CarShow
Copyright 2013 All Rights Reserved
Installation Guide
CS-PRIS12-3
Page 7
Connect Optional Harnesses such as
iPod, Satellite Radio, Camera
These harnesses must be fully engaged prior to the system
installation.
See the Main Harness Diagram below for more information
Turn the vehicle ON and confirm the
unit is fully operational
With the connectors
Fully Engaged
, turn the vehicle
on and press the
RESET
located behind SD card
access door.
Insert a DVD to confirm the Video
Disable Circuit is properly Operating.
The Brake Wire must be connected to the Park Brake
Indicator Wire to complete a ground when the brake is
engaged.
ENABLE INSTALLER SETTINGS
You will need to select certain Installer setting based on any Optional Equipment that you may have
installed
STEP
6
Launch the Installer Setting Screen
From any screen with the Menu Button, follow these
steps to display the Installer Setting Screen:
1)
From any Screen, select “Menu”
2) From the
Menu Screen, select “Settings”
3)
Press “Keypad,” Press “1120” and “Enter”
Select the individual Settings as needed
for the installed components
Selectable options vary by product and installation.
Select the options as applicable for the installed
optional components.
