CarShow
Installation Guide
CarShow
Copyright 2012 All Rights Reserved
Installation Guide
CS-FD1034
Page 8
Remove SYNC Display
Carefully remove SYNC display and unplug all
connections
Remove SYNC Display Brackets
Carefully remove 4 x Phillips (2 left/2 right) bracket
screws
Remove OEM Radio Unit
Carefully remove 4 x 7mm radio mounting screws
Unplug OEM Radio Unit
Carefully unplug all harness and antenna connections
from OEM radio unit
LOCATING REMOTE COMPONENTS
You will need to mount the GPS Antenna on the exterior of the vehicle.
The following steps will help guide you through this process.
STEP
4
Use Caution around SRS Components
I
t is the
installer’s responsibility
to ensure that the safety
equipment in the vehicle is
NOT
adversely affected by
installation of this system. Ensure that the routing of the
harnesses do NOT obstruct airbags, SRS or other safety
devices.
CAUTION
CAUTION
