CarShow
Installation Guide
CarShow
Copyright 2012 All Rights Reserved
Installation Guide
CS-FD1034
Page 11
Ro
Cable Routing
Fish extension cable through center of truck and run
towards front of vehicle
Ro
Cable Routing
Run cable through driver’s floor board grommet as shown
at right. Then route cable to radio cavity.
Some vehicles will vary.
Installer will need to use best judgment.
Install Complete
Install complete as shown at right
all
Prepare Car Show Radio Bezel
You will need to prepare the Car Show Navigation System for installation in the vehicle
STEP
6
OE
OEM and Car Show Bezel
Preparation
OEM Radio Bezel on left and Car Show on right
OE
OEM Radio Face Assembly
Remove 7x T10 torx screws to remove OEM Radio face
Assembly