Note: 1. This tracker use 2G GSM network, and it upload tracking only through GPRS, it can not
work in CDMA network or 3G(WCDMA or CDMA2000) network. (Some 3G SIM card
can use in 2G GSM network, this kind of 3G SIM card can use in this tracker)
2. Please confirm the PIN code of the SIM card is disabled (insert the SIM card to mobile
phone and can be disabled in mobile phone setting menu).
3. Before installing or uninstalling the SIM card, please power off the tracker.
3. ANTENNA
The Antenna of GSM and GPS are built in the tracker.
Pleas leave the tracker away from big metal, this will reduce the GSM and GPS signal. And the
GPS antenna need faced to heaven, otherwise the GPS signal will be weak and maybe can not
located.
4. Using Condition
The working temperature is -20
0
C to 60
0
C, over this range the specification maybe can not reach
the standard level, the storage temperature can reach to -40
0
C to 80
0
C.
5. Back to factory setting (Default configuration)
First send SMS (pw,123456,center,yourphonenumber#) to the tracker to set your mobile phone
number as center or slave center number, then sending SMS (factory#) to the tracker will delete all
user setting and back to factory configuration and repower on.
Notes: After back to default set, all IP / APN / GPRS / Language / Timezone / Alarm Setting
etc are deleted and back to factory setting, just like a new product, all preset phone number
are deleted and password change to 123456, all the alarm setting is canceled, if the
IP/APN/GPRS name & password/TIMEZONE are changed, and you need set these again by
sending SMS.
How to Install
1. Connect the RED and BLACK wires to car battery, the tracker will power on automatically, the
tracking uploading is controlled by shock sensor, if the tracker begin to move, the tracker begin upload
the tracking, if the tracker stop moving, then the tracker will stop upload the tracking , and go to
standby mode, the platform will display offline.
RED---------- 9-40V B
BALCK------ GND (Car Body)
