-13-
The move alarm SMS is as follow:
Move Alarm
https://maps.google.com/maps?q=22.67680,114.15188
Battery:88%
9. Remove Alarm
The built-in proximity sensor will detect the unit work after it powers on. If it is removed from the installtion
place with above 15 mm, this would trigger the remove alarm. Then it will send alarm sms to the authorized
phone and tcp alrm message to the platform.
The remove alarm SMS is as follow:
Device removed Alarm
https://maps.google.com/maps?q=22.67680,114.15188
Battery:88%
The platform will get the emergency SOS alarm when the remove alarm happens.
Note:
The bottom side of the unit must be placed on the flat surface with the distance below 10mm from the
surface to avoid the mistake alarm.
The actived lable must be removed before this function work well.
10. Check Alarm Setting
Send SMS “ALARM*123456” to the tracker number, “ALARM” is command, “123456” is password, the
tracker will send back the information of the alarm setting, for example:
Shock Alarm:OFF,Move Alarm:OFF,Device removed Alarm:ON,Geo-Fence:OFF,OverSpeed:OFF,Power
Down Alarm:ON,Alarm calling:ON,Alarm SMS:ON.
11. Cancel All Alarm Setting
Send SMS “CANCELALARM*123456” to tracker, “CANCELALARM” is a command, “123456” is password,
the tracker will send back information “ Cancel All Alarm Setting”, and cancel all alarm setting.
Note: RESET and FACTORY also can cancel all alarm setting.
12. Set Alarm by Calling: ON/OFF
Send SMS “CALLON*123456” (Call to authorized number) or “CALLOFF*123456” (No calling) to the
tracker, “CALLON” or “CALLOFF” is a command, “123456” is the tracker password, the tracker will send back
the information “Alarm by calling : ON” or “Alarm by calling :OFF”, If the alarm by calling is ON, then when the
alarm is triggered, the tracker will call the authorized number to notice the alarm, the default setting is ON.
13. Set Alarm by SMS: ON/OFF
Send SMS “SMSON*123456” (Sending SMS to authorized number) or “SMSOFF*123456” (No SMS) to
the tracker, “SMSON” or “SMSOFF” is a command, “123456” is the tracker password, the tracker will send
back the information “Alarm by SMS : ON” or “Alarm by SMS :OFF”, If the alarm by SMS is ON, then when the
alarm is triggered, the tracker will send SMS to the authorized number to notice the alarm.the default setting is
ON
