-12-
The overspeed alarm SMS is as follow:
Overspeed Alarm
Current Speed:110km/h,Setting:100km/h
Battery:88%
Send SMS “OVERSPEEDALARMOFF*123456*” to the tracker will disable the over speed alarm setting,
“OVERSPEEDALARMOFF” is command, “123456” is tracker password, the tracker will send back the
information “Set Overspeed Alarm Off ” .
Normally this function is used in working mode 2 & 3. Default the over speed alarm is set to off.
7. Break Geo-fence Alarm (No Platform Necessary)
The geo-fence is a circle area on the map, the center of the circle is set by tracker current location (If the
tracker can not located by GPS, then the setting geo-fence command fail), and the radius is set by SMS. When
the tracker move out the area, the tracker will send alarm information to user by SMS.
Send SMS “GEOFENCEALARMON*123456*RRR” to the tracker number, “GEOFENALARMON” is
command, “123456” is password, “RRR” is the radius of the geo-fence circle (the center of the circle is the
tracker current location), unit is km, it is from 001 to 999. After receive the command, the tracker will locate
immediately, after located, the tracker will set current location as the geo-fence center and RRR as the
geo-fence radius (unit is km), the tracker will send back the information “Geofence (A) Alarm On, RRRkm”, if
the tracker can not locate, the tracker will reply “Can not locate, Set Geofence Alarm Fail”.
After set the geo-fence alarm, the tracker will locate every 5 minutes to check the tracker is in the
geo-fence circle or not (in working mode 1, only after the tracker weak up it will check the geo-fence alarm), if
the tracker is out of the geo-fence circle, the tracker will send out geo-fence alarm information to all authorized
number.
The geo-fence alarm SMS is as follow:
Break Geofence Alarm
https://maps.google.com/maps?q=22.67680,114.15188
Battery:88%
8. Move Alarm (No Platform Necessary)
The move alarm is a geo-fence alarm with 500 meters radius and current location center , it is similar with
geo-fence alarm.
Send SMS “MOVEALARMON*123456” to the tracker number, “MOVEALARMON” is command, “123456”
is password, After receive the command, the tracker will locate immediately, after located, the tracker will set
current location as the geo-fence center and 500 meters as the geo-fence radius (unit is meters), the tracker
will send back the information “Move Alarm On”, if the tracker can not locate, the tracker will reply “Can not
locate, Set Move Alarm Fail”.
After set the move alarm, the tracker will locate every 5 minutes to check the tracker is in the 500 meters
geo-fence circle or not (in working mode 1, only after the tracker weak up it will check the move alarm), if the
tracker is out of the geo-fence circle, the tracker will send out move alarm information to all authorized number.
