Carrier XCT7 40VU0051-7E-QEE, Инструкция по установке и эксплуатации, Страница: 12 / 156

Maintenance
Attention
• Repair can only be performed by professional personnel.
• Before touching the connection line, all power supplies should be switched off. Only after switching off the power
supply can the operator clean the air conditioner as to avoid electric shock or injury.
• When cleaning the air cleaner, make sure to use a stable platform; don't flush the air conditioner with water, or the
electric shock might be caused.
Daily Maintenance:
• Cleaning
Clean the air cleaner with a vacuum cleaner or water to remove dust.
If there is too much dust, use the fan or directly spray the special cookware detergent on the air inlet grid, and then clean it with
water after 10 minutes.
(A) remove dust with a vacuum cleaner.
(B) For excessive dust, use a soft-hair brush and a mild detergent to clean.
(C) Allow filter to dry fully before reinstalling.
• Don't clean it with hot water of over 50°C to avoid fading or distortion.
• Don't dry it on the fire, or the cleaner might cause fire.
Attention
Clean the air cleaner & Inlet guide plate
Clean the air cleaner
• Don't dismantle the air cleaner if not cleaning, or faults might be caused.
• When the air conditioner operates in the environment with too much dust, clean the air conditioner more times
(generally once every two weeks).
As shown in the drawing, draw the wind guide on both sides of the rack, with the thumb to hold down the screen two
buttons down gently pull the other side of the filter from the bayonet can be removed.
Opposite fastener
Fastener
Rack
4
English