![background image](http://html1.mh-extra.com/html/carrier/saline-20/saline-20_operating-instructions-manual_2562139008.webp)
4
To the Operator
Model 20
080916
Section 2
To the Operator
The equipment you have purchased has been
carefully engineered and manufactured to give you
dependable operation.
The Model 20, when properly operated and cared for,
will produce a consistent quality product. Like all
mechanical products, this machine will require
cleaning and scheduled maintenance. A minimum
amount of care and attention is necessary if the
operating procedures outlined in this manual are
followed closely.
This Operator’s Manual should be read before
operating or performing any maintenance on your
equipment.
Your equipment will NOT eventually compensate and
correct for any errors during the set-up or filling
operations. Thus, the initial assembly and priming
procedures are of extreme importance. It is strongly
recommended that all personnel responsible for the
equipment’s operation study these procedures
together in order to be properly trained and to make
sure that no misunderstandings exist.
In the event you should require technical assistance,
please contact your local authorized Taylor Distributor
for service.
Note:
Warranty is valid only if the parts are authorized
Taylor parts, purchased from an authorized Taylor
Distributor, and the required service work is provided
by an authorized Taylor service technician. Taylor
reserves the right to deny warranty claims on
equipment or parts if non--approved parts or
refrigerant were installed in the machine, system
modifications were performed beyond factory
recommendations, or it is determined that the failure
was caused by neglect or abuse.
Note: Constant research results in steady
improvements; therefore, information in this
manual is subject to change without notice.
If the crossed out wheeled bin symbol is
affixed to this product, it signifies that this product is
compliant with the EU Directive as well as other similar
legislation in effect after August 13, 2005. Therefore,
it must be collected separately after its use is
completed, and cannot be disposed as unsorted
municipal waste.
The user is responsible for returning the product to the
appropriate collection facility, as specified by your local
code.
For additional information regarding applicable local
laws, please contact the municipal facility and/or local
distributor.
Compressor Warranty Disclaimer
The refrigeration compressors on this machine are
warranted for the term indicated on the warranty card
accompanying this machine. However, due to the
Montreal Protocol and the U.S. Clean Air Act
Amendments of 1990, many new refrigerants are
being tested and developed, thus finding their way into
the service industry.
Some of these new refrigerants are being advertised
as “drop-in” replacements for numerous applications.
It should be noted that, in the event of ordinary service
to this machine s refrigeration system,
only the
refrigerant specified on the affixed data label
should be used.
The unauthorized use of alternate
refrigerants will void your compressor warranty. It will
be the owner s responsibility to make this fact known
to any technician he employs.
It should also be noted that Taylor does not warrant the
refrigerant used in its equipment. For example, if the
refrigerant is lost during the course of ordinary service
to this machine, Taylor has no obligation to either
supply or provide its replacement either at billable or
unbillable terms. Taylor does have the obligation to
recommend a suitable replacement if the original
refrigerant is banned, obsoleted, or no longer available
during the five year warranty of the compressor.
Taylor will continue to monitor the industry and test
new alternates as they are being developed. Should a
new alternate prove, through our testing, that it would
be accepted as a drop-in replacement, then the above
disclaimer would become null and void.
To find out the current status of an alternate refrigerant
as it relates to your compressor warranty, call the local
Taylor Distributor or the Taylor factory. Be prepared to
provide the Model/Serial Number of the unit in
question.
Содержание Saline 20
Страница 1: ...Model 20 Saline Slush Freezer Operating Instructions 030990 M 7 23 01...
Страница 4: ...Table of Contents Model 20 Notes...
Страница 16: ...12 Refrigeration Schematic Model 20 Section 7 Refrigeration Schematic...
Страница 22: ...Model 20 051813 12...