Carrier Room Air Purifier, Руководство пользователя

Страница: 10 / 13

USER MANUAL
17 16
CARRIER ROOM AIR PURIFIER
Cleaning the Dust Sensor
Remove the cover of the dust sensor
located on the right side of the
product.
Replace the cover of the dust sensor.
Replace the filter cover. Replace the
top cover of the product with the
logo facing the front.
Wipe the lens and inlet of the dust
sensor with a little water on a cotton
swab. Thoroughly dry with a clean,
dry cotton swab.
Cotton Swab
Lens
3
5
4
1 2
Hold the top cover of the product
with both hands and pull it up.
Grasp the filter cover hole on the rear
and pull it forward.
Sensor
Cover
Long Term Storage
Run the product for 1 hour on a clear
day, disconnect the power plug from the
outlet, and dry the inside of the product.
Cover the product and store in a dry
space out of direct sunlight.
1 2
Filter cover
hole
CAUTION
Do not wipe sensor parts with
harsh cleaning chemicals, such as
acetone, alcohol, etc. It may cause
damage to the lens.
Symptom Check Solution
The product does
not turn on when
pressing the
Power button.
Is there a power outage?
Make sure that the electricity supply is
on and try again.
Is the power plug connected?
Plug in the power plug and try operating
again.
Is the power outlet working?
Attempt to plug product into a different
power outlet and turn on.
Filter replacement
indicator is still on.
Did you press + " " button at
the same time for more than 5 seconds
after replacing the filter?
When replacing the filter, be sure to
press the + " " button for at
least 5 seconds until the 'ting' sound is
heard.
Product is
producing a
strange smell.
Check if the dust filter or deodorizing
filter smells strange or not.
Replace the filter.
"FAN" flashes on
the screen.
Is the "FAN" indicator flashing after
unplugging the power plug and plugging
it in again after about 10 seconds?
Unplug the power cord and contact
customer service.
Troubleshooting
Troubleshooting
Sleep
Sleep
Auto
Auto
Care and Maintenance