6
Setting Current Time and Reset
BEFORE OPERATION
Replacing Batteries
BEFORE OPERATIO
• Changing batteries should be done after turning off the unit.
NOTE
4
For this setting always use either button
or
.
With the remote control On or OFF, press button for more than
5 seconds
Once the current time is set, press button to confirm it.
5
The current hour figure flashes.Press either button
or
to
set the current hour. Press button to move to minutes and
set them.
Press reset button with a sharp object if the remote control is not
operating properly or after replacing the batteries.
3
1
Remove the cover of the battery compartment at the back
of the remote control by sliding it out in the direction of the arrow.
Remove the used batteries and insert new batteries. The remote
control uses two batteries.(1.5V(L)R03x2)
2
6
7
42KH5A54020_O
2004.6.17, 11:25 AM
Page 6
Adobe PageMaker 6.5K/PPC