12
1
ON TIMER button
............................................
Press this button, even if the remote control is OFF.
The relevant icon and time figure will start to flash.
If 10 seconds have elapsed and no button is pressed,
the remote control turns OFF (if it was already OFF
when button was pressed) or timer function auto-
matically deactivates.
HOUR, MINUTE buttons
(buttons and ) .......
If the unit is ON, the only possible selection is the
start-up time.
The unit will operate with the selections shown on the
display.
HOUR, MINUTE button
(buttons and ) .........
If the unit is OFF: to select the start-up time,
use the temperature control buttons
(buttons and ). First select the hours and, after
have confirmed these by pressing button , select
the minutes using either button or .
To definitively set the time, press button again.
Operating mode ...................................................
Choose the unit operating mode The icons will flash.
To select the mode, use the button .
Once the mode has been decided, press button .
The icon of the selected mode will stop flashing.
UNIT OPERATION
ON timer procedure
2
3
4
5
6
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345
TIMER OPERATION
7
Desired temperature
..........................................................................................
To select the desired temperature, the value is flashing, use either
button or .
Push button , to confirm the selection. Numbers will stop flashing.
Fan speed
..............................................................................................................
Choose the fan speed, using button
. When the selection has
been completed, press button for confirmation. The icon will
stop flashing
Louvre positioning
..............................................................................................
Now this icon is flashing. Use button , to select desired position.
Press button for confirmation. Now all icons are fixed on display.
If you want to cancel selections up to here inserted, push button ;
if you want to cancel all options once timer has been set, push button
and then .
42KH5A54020_O
2004.6.11, 3:6 PM
Page 12
Adobe PageMaker 6.5K/PPC