4
Fig. 9 — Positioning Stiffener Brackets
Step 7 — Install Enclosure and Runout
Arrangement As Required
Use end frame as template when drilling holes on unit enclo-
sure side panels. Tap runout enclosure lightly to ensure tight
fit in end frame slots.
COLUMN-TO-COLUMN ARRANGEMENT (SEE FIG. 10)
1. Drill two
3
/
16
-in. holes for attaching runout.
2. Cut runout enclosure and enclosure panel to desired
length.
3. Fit runout enclosure into slots of one end frame.
4. Insert enclosure panel into end frame slots.
5. Fit second end frame to opposite end of assembly.
6. Hang assembly on wall mounting strip and adjacent to
unit enclosure. Stiffener bracket lip must support bottom
of runout.
7. Attach end frame to unit enclosure with two No. 8 sheet
metal screws (field-supplied).
Fig. 10 — Column-to-Column Enclosure Arrangement