Carrier i-Vu MPC Open XP IO48/816 Скачать руководство пользователя страница 47

Страница: 47 / 50

Document revision history

MPC Open XP

MPC Open XP IO48/816

Carrier Proprietary and Confidential

Installation and Start-up Guide

Important changes to this document are listed below. Minor changes such as typographical or formatting errors are not

listed.

Date

Topic

Change description

Code*

6/20/17

Appendix A: MPC Open XP wire lists

Caution added to not use 39m library applications with the MPC

Open XP.

C-TS-CP-E-WB

2/23/17

Changed sensor and adapter name from WS to wireless.

C-D

1/18/17

Wireless sensor overview

To install the Wireless Adapter for

Wireless sensors

New topics

C-D

Wiring devices to the MPC Open XP's

Rnet port

Updated format and added Wireless Adapter for Wireless sensors C-D

Input wiring specifications

Added Wireless Adapter for Wireless sensors

C-D

To wire the controller to the network

Added BACnet ARC156 connection information.

C-D

Wiring for communications

Changed from Wiring the MPC Open XP to the MS/TP network

C-D

Specifications

Added BACnet ARC156 and updated Rnet port information to

include Wireless Adapter.

C-D

Cover
What are the MPC Open XP and MPC

Open XP expanders?

Changed MPC Open XP to new silkscreen

C-D

2/19/16

Local access to the MPC Open XP

Added USB Link wiring caution.

C-TS-RD-E-JH

2/9/16

To attach the MPC Open XPIO expander Added step explaining jumper settings for connecting more than

one expander.

X-TS-RD-E-BR

12/3/15

Replacing the battery

Corrected instructions from the wrong battery to the correct one.

X-D

11/18/14 MPC Open XPIO48 and MPC Open

XPIO816

Power rating corrected from 45VA to 40VA, as listed on the

silkscreen

C-D-LJ-O-BR

8/14/14

MPC Open XP specifications

Maximum number of BACnet third-party integration points using

Snap - changed to unlimited, depending on memory
Power - removed references to BACview
Rnet port - added Equipment Touch and removed BACview

Rnet port - added note that number of possible ZS sensors you

can have with an Equipment Touch is 15
Local Access port - removed BACview, added Equipment Touch
Battery - added Equipment Touch and removed BACview

C-D-LJ-O

Wiring devices to the Rnet port

Changed from "Wiring a communicating zone sensor to the MPC

Open XP"
Removed references to BACview

Connecting an SPT sensor

Removed BACview and added Equipment Touch

To wire an Equipment Touch to the

MPC Open XP

New topic

BACview devices

Removed references and topics

Local Access to the MPC Open XP

Removed BACview and added Equipment Touch

To wire the Equipment Touch to the

MPC Open XP

Added Caution to maintain polarity and use the power supply only

for Carrier controllers

C-TS-RD-E

Restore factory defaults

Corrected from using a jumper to holding the Format button

C-D-LJ

* For internal use only

Document revision history

Содержание i-Vu MPC Open XP IO48/816


















































Результаты поиска

Содержание i-Vu MPC Open XP IO48/816

Отзывы:

Carrier i-Vu MPC Open XP IO48/816, Руководство по установке и запуску, Страница: 47 / 50

Результаты поиска

Содержание i-Vu MPC Open XP IO48/816

Отзывы: