Carrier Elegant 53QFJ36, Руководство пользователя, Страница: 20 / 44

( ) 17
USE OF REMOTE CONTROL (Cont.)
TIMER ON Function ( Off – Start Operation )
TIMER ON Function is useful when you want to start automatically
the air conditioner at a desired setting time ( between 0 ~ 24 hrs )
when you wake up in the morning or when you return home.
TO SET TIME OF TIMER ON FUNCTION
1. Press TIMER ON button. The remote control display shows
TIMER ON indicator, the last setting time and the signal "h".
Now it is ready to reset the setting time of TIMER ON function.
2. Press TIMER ON button again to set the desired setting time.
Each time you press the button, the time increases by half
an hour between 0 and 10 hours and by one hour between
10 and 24 hours.
3. After setting TIMER ON function, there will be a one half second
delay before the remote control transmits the signal to the air
conditioner. Then after approximately another 2 seconds, the
signal "h" will disappear and the set temperature will re-appear
on the LCD display of the remote control.
TIMER ON
indicator symbol will illuminate on the operation
panel display of the indoor unit.
EXAMPLE OF TIMER ON SETTING
To start automatically the air conditioner in 6 hours, apply the
following steps :
1. Press TIMER ON button, the last setting of starting operation
time and the signal “h” will show on the display of the
remote control.
2. Press TIMER ON button to display "6:0h" on the TIMER ON
display of the remote control.
3. After setting TIMER ON function, there will be a one half second
delay before the remote control transmits the signal to the air
conditioner. Then after approximately another 2 seconds, the
signal "h" will disappear and the set temperature will re-appear
on the LCD display of the remote control.
TIMER ON indicator symbol will illuminate on the
operation panel display of the indoor unit.
TO CANCEL TIMER ON FUNCTION
Press TIMER ON button until the setting time is 0.0
CAUTION
ƒ
When you select TIMER ON function, the remote control automatically transmits TIMER ON signal to
the indoor unit for the specified time.
Therefore, keep the remote control in a location where it can transmit the signal to the indoor unit
properly.
ƒ
The effective operation time set by the remote control for TIMER ON function is limited to the
following settings: 0.0, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5,
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, and 24.
6 hours later
Set
Off
Start