( )
16
USE OF REMOTE CONTROL (Cont.)
AUTO SWING -
AIR VERTICAL FUNCTION
START
•
When you press
AIR VERTICAL
button, without releasing
for 2 more seconds then the horizontal supply air louvers
will move automatically move to up and down for vertical supply
air flow.
•
If you want to fix the horizontal louvers at desired location,
press
AIR VERTICAL
button once and quickly until the
horizontal louvers reach the desired position,
then press again
AIR VERTICAL
button.
-
The moving angle of the horizontal louver is 6°C for each press.
-
Keep pressing the button to move the vertical louver to
the desired position.
•
Then the indicator symbol of
AIR VERTICAL
function
will illuminate on the operation panel display of the indoor unit.
STOP
To Cancel
AIR VERTICAL
function, press
AIR VERTICAL
button again.
BE CAREFUL !
Manually moving the horizontal supply air louvers with hand could damage the louvers.
NOTES
•
The starting angle of the horizontal louver should not be too small, otherwise the narrow air outlet
will affect cooling or heating efficiency.
•
Do not set the starting angle of the louvers too small during cooling or drying operation
.
Otherwise, condensation may occur on the surface of the horizontal louver and cause dew
dripping.
•
During the operation, if the louvers can not swing normally, shut off the unit and unplug for
several minutes, then plug it again and restart the operation.
•
The horizontal louver may slightly vibrate during the operation. This is normal operation.
Horizontal Louvers
Auto Swing Air Vertical
( Up and Down )