CONTROL PADS ON THE DEHUMIDIFIER
CONTROL PADS ON THE DEHUMIDIFIER
12
GB
Control pads
When you push the button to change operation modes, the unit
will make a beep sound to indicate that it is changing modes.
1
Power Pad
Press to turn the dehumidifier on and off.
NOTE: When the compressor startups or stops running, the
unit may make a loud voice, it is normal.
2
Mode Pad
Press to select the desired operation mode from
Dehumidifying,Dryer,Continuous dehumidifying and Smart
dehumidifying.
NOTE: Dryer and Smart dehumidifying modes are optional.
3
4
/
: Up/Down Pads
• Humidity Set Control Pads
The humidity level can be set within a range of 35%RH
(Relative Humidity) to 85%RH (Relative Humidity) in 5%
increments.
For drier air, press the pad and set to a lower percent
value (%).
For damper air, press the pad and set a higher percent
value (%).
• TIMER Set Control Pads
Use the Up/Down pads to set the Auto start and Auto stop
time from 0.0 to 24.
5
Fan Pad
Control the fan speed. Press to select fan speed in three
steps-low, med and high. The fan speed indicator light
illuminates under different fan speed settings. But when
select high fan speed, both the low and med fan speed lights
illuminate.
6
Timer Pad
Press to initiate the Auto start and Auto stop feature, in
conjuction with the and pads.
7
Wireless Pad(optional)
Press this pad for 3 seconds to initiate the Wireless
connection mode. The LED DISPLAY shows ‘AP’ (at this
time the unit shuts off all other functions) to indicate you can
set Wireless connection. If connection(router) is successful
NOTE:
The control panel of the unit you purchased may be slightly different according to the models.
1
2
3
4
5
6
7
8
Wireless
operation on
indicator light
Timer indicator
light
Fan speed
indicator light
Bucket full
indicator light
Dryer
operation on
indicator light
Continuous
operation on
indicator light
Smart dehumidifying
operation on indicator
light I
Unit operation
on indicator
light
Fig.1
CONTROL PADS ON THE DEHUMIDIFIER
