Carrier AppController OPN-APP, Руководство по установке и запуску

Страница: 16 / 34

Installing the AppController
AppController CARRIER CORPORATION ©2019
Installation and Start-up Guide All rights reserved
10
2
Set the appropriate jumpers on the AppController.
To use... For...
IN-1 Thermistor Set jumpers IN-1 to the Therm position.
IN-1 0 – 5 Vdc Set jumpers IN-1 to the 0-5 Vdc position.
IN-2 Thermistor/
Dry contact Set jumpers IN-2 to the Thermistor/Dry contact position.
All Thermistor
Dry contact Verify the IN-5 jumper is on.
Rnet Port ZS sensors
Wireless Adapter for
wireless sensors
Equipment Touch
TruVu™ ET Display
Set the Rnet jumper to Rnet .
3
Connect the analog output wiring to the screw terminals on the AppController and to the controlled device.