34
1
Remote Control Configuration
•
Remote Control is used for heat pump type air conditioner and cool only type
air conditioner.
Before user operates air conditioner, thus, cool only type and heat pump
type of remote configuration and other items must be selected as follows.
Press the and buttons of the infrared remote controller
and hold them pressed for more than 5 seconds.
The display will be cleared, the temperature segments will
display the first configuration item (CH = remote address) and
the time segments will display the default value of this
configuration item (Ab = control of both indoor units).
Press either the or button to change the default value
(A) to the new value (b).
Press
button repeatedly until “tU” is displayed.
Press either the or button to change the default value of
temperatures in Degrees Celsius (C) to the new value
Degrees Fahrenheit (
o
F).
Press
button repeatedly until “rc” is displayed.
Press either the or button to change the default value of
Heat pump in model type (HP) to new value cooling only
type(co).
Press
button repeatedly until “HR” or “CR” is displayed.
Press either the or button to change the default value of
Maximum heating setpoint or minimum cooling setpont.
Press
button repeatedly until “CL” is displayed.
11
2
3
4
5
6
7
8
12
13
Confirguration item
Value
Description
"CH"
A : Channel A
Remote ID selection
Ab : Channel A and B
Defaults to A
b : Channel B
"tU"
C : Degrees C
Temperature units
F : Degrees F
Defaults to C
"rc"
HP : Normal Operation
Puts the Remote into
CO : Cooling Only
Cooling Only Mode
Defaults to HP
"HR"
17-32 : 17
°
~32
°
C
Maximum heating setpoint
63-90 : 63
°
~90
°
F
Degrees C or F is determined
by “tU”configuration above
"CR"
17-32 : 17
°
~32
°
C
Minimum cooling setpoint
63-90 : 63
°
~90
°
F
Degrees C or F is determined
by “tU” configuration above
"CL"
12 : 12 Hour Standard
Time Format
(AM/PM)
Defaults to 12
24 : 24 Hour Military
CONFIGURATION
9
10
NOTE
Press either the or button to change the default value of
time format as AM/PM (12) to the new value of 24 hours time
format (24).
LOOK OUT! Whichever configuration value changed must
be confirmed pressing button each time.
Press
button to leave the configuration menu.
When 30 seconds have elapsed and no buttons have been pressed, the
remote controller will automatically exit the configuration menu and the
procedure has to be restarted.