Carrier 40GJB, Руководство пользователя, Страница: 21 / 28

nection pipe with insulating pipe, and
insulating pipe
1. Connect the drain hose to the outlet pipe of
outlet
pipe
drain hose
drain hose
tape
outlet pipe
drain hose
insulating pipe
Add insulating pipe in the indoor
The plastic expansion particles are
1. Open the panel, remove the screw
on the wiring cover and then take
Step seven: connect wire of indoor unit
4. Wrap the indoor pipe and joint of con-
then wrap it with tape.
Step six: install drain hose
Installation of indoor unit
torque wrench
open-end
wrench
indoor pipe
pipe
union nut
Hex nut diameter
indoor unit.
Note:
drain hose in order to prevent
condensation.
not provided.
down the cover.
wiring cover
screw panel
Note:
If a 18k indoor unit is to be connected with Free Match outdoor unit, a transitional
pipe joint (provided) should be added at the pipe joint of indoor unit evaporator
Please refer to step 1-4 during installation.
1/4 in (6 mm) 20.34~27.12 ft.lb(15~20 N.m)
Tightening torque[ft.lb(N.m)]
40.68~54.24 ft.lb(30~40 N.m)
54.24~74.58 ft.lb(40~55 N.m)
81.36~88.14 ft.lb(60~65 N.m)
94.93~101.7 ft.lb(70~75 N.m)
3/8 in (9.52 mm)
1/2 in (12 mm)
5/8 in (16 mm)
3/4 in (19 mm)
5/8 in (16 mm).
20