Carrier 40GJB, Руководство пользователя, Страница: 19 / 28

Installation of indoor unit
Step one: choosing installation location
Step two: install wall-mounting frame
rm it with the client.
1. Hang the wall-mounting frame on the wall; adjust it in horizontal position with the
plastic expansion particles in the holes.
3. Fix the wall-mounting frame on the wall with tapping screws (ST4.2X25TA) and
.
1. Choose the position of piping hole according to the direction of outlet pipe. The
position of piping hole should be a little lower than the wall-mounted frame,
shown as below.
Step three: open piping hole
2. Open a piping hole with the diameter o
position. In order to drain smoothly, slant the piping
hole on the wall slightly
Left
Wall
Right
Mark in the middle of it Level meter
Rear piping hole
Wall
Space
to the
wall
above
Space
to the
wall
above
Rear piping hole
、 12K:
Left
Wall
Right
Mark in the middle of it Level meter
Rear piping hole
Wall
Space
to the
wall
above
Space
to the
wall
above
Rear piping hole
18K:
Left
Wall
Right
Mark in the middle of it Level meter
Rear piping hole
Wall
Space
to the
wall
above
Space
to the
wall
above
Rear piping hole
24K:
18
2 1/6 in (55mm) 2 3/4 in (70mm)
2 1/6 in (55mm) 2 1/6 in (55mm)
6 in (150 mm) 6 in (150 mm)
6 in (150 mm)
3/4 in (70mm) 3/4 in (70mm)
3/4 in (70mm) 3/4 in (70mm)
6 in (150 mm)
6 in (150 mm)
6 in (150 mm)