–
44
–
1
7
9
4
8
6
3
2
10
5
9-4-3. Name and Functions of Indications on Remote Controller
[Display]
All indications, except for the clock time indicator, are displayed by pressing the button.
1
Transmission mark
This transmission mark indicates when the
remote controller transmits signals to the indoor
unit.
2
Mode indicator
Indicates the current operation mode.
(AUTO : Automatic control, A : Auto changeover
control, : Cool, : Dry, : Heat)
3
Temperature indicator
Indicates the temperature setting.
(17
°
C to 30
°
C)
5
TIMER and clock time indicator
The time setting for timer operation or the clock
time is indicated.
The current time is always indicated except
during TIMER operation.
6
Hi-POWER indicator
Indicates when the Hi-POWER operation starts.
Press the Hi-POWER button to start and press it
again to stop the operation.
7
(PRESET) indicator
Flashes for 3 seconds when the
PRESET
button is
pressed during operation.
The mark is shown when holding down the
button for more than 3 seconds while the mark is
flashing.
Press another button to turn off the mark.
8
ECO indicator
Indicates when the ECO is in activated.
Press the ECO button to start and press it again
to stop operation.
9
A, B change indicator remote controller
When the remote controller switching function is
set,
“
B
”
appears in the remote controller display.
(When the remote controller setting is
“
A
”
, there is
no indication at this position.)
4
FAN speed indicator
Indicates the selected fan speed.
AUTO or five fan speed levels
(LOW , LOW
+
, MED
, MED
+
,
HIGH
) can be shown.
Indicates AUTO when the operating mode is
either AUTO or : Dry.
10
Swing
Indicates when louver is swing.
Press swing button to start the swing operation
and press it again to stop the swing operation.
