Carrier 38MARBQ09AA3 Скачать руководство пользователя страница 37

Страница: 37 / 116

SG-38MARB-01 Specifications subject to change without notice.

DIAGNOSIS AND SOLUTION (CONT)

The indoor fan speed is operating outside of the normal range (EH03)

Description:

When the indoor fan speed remains too slow or too fast for an extended period of time, the LED displays a failure code and the

unit turns off.

Recommended parts to repair:

• Connection wires
• Indoor main PCB
• Fan assembly
• Indoor main PCB

Troubleshooting

YES

Turn the power off. Wait 2 minutes, then restart.

Is it within normal parameters?

Replace the fan motor.

Does a problem remain?

The unit is operating normally.

Shut off the power supply.

Rotate the fan by hand.

YES

Does it turn easily?

Find the cause of the problem and resolve.

Check the fan motor wiring.

YES

Is it improperly wired?

Ensure the connections are good.

Measure the voltage for

the fan motor from the PCB.

YES

Replace the indoor main PCB.

Содержание 38MARBQ09AA3





















































































































Результаты поиска

Содержание 38MARBQ09AA3

Отзывы:

Carrier 38MARBQ09AA3, Руководство по обслуживанию, Страница: 37 / 116

Результаты поиска

Содержание 38MARBQ09AA3

Отзывы: