Carrier 30AJ, Инструкция по установке, эксплуатации и обслуживанию

Страница: 63 / 76

63
Step 4:
L1 off, L2 blinks, L3 and L4 off. L5 will
turn on if the selected temperature is between
–5°C and 15°C.
Step 5:
L1 off, L2 blinks, L3 off, L4 blinks. L5 will always
turn on.
Step 6:
L1 off, L2 and L3 blink, L4 off. L5 will turn on if
there is 24Vca in the IN1 terminal (Pressostat input).
Step 7:
L1 off, L2, L3 and L4 blink. L5 will turn on after
1 second and will remain on during 5 seconds. The
IN1-OUT1 contact will remain closed while L5 is ON
(Contact for the compressor contactor handling).
Step 8:
L1 blinks, L2, L3 and L4 off. L5 will turn on after
1 second and will remain in this status. The IN2-OUT2
contact will remain closed while L5 is ON (Contact to
handle the solenoid valve).
Step 9:
L1 blinks, L2 and L3 off, L4 blinks. L5 will turn
on if there is 24 Vca in the IC3 terminal (Input for the
remote control contact).
Step 10:
L1 blinks, L2 off, L3 blinks, L4 off. L5 will turn
on if there is 24 Vca in the IC4 terminal (Input for the
ON/OFF remote control).
Speci fi cations:
Power voltage: 24V ±15%, 50Hz ou 60Hz.
Maximum consumption: 200mA
Operating temperature: -20°C a +60°C
Digital inputs (IN1, IN4, IN5, IN6)
Maximum permanent voltage
Input current
Maximum de-activation voltage
Minimum activation voltage
Answer time 0 to 24Vca
Answer time 24 to 0Vca
80Vca or 60Vcc
0,65mA @ 24Vca
(for IN1 add current in OUT1)
1Vca
4Vca
0,25s
1s
Analog inputs (A3,A4) Sensor type NTC of 5kW @ 25°C
Temperature setting input
Temperature setting
Lineal potentiometer
Digital outputs
• OUT1
Maximum voltage
Maximum current
• OUT2
Maximum voltage
Maximum current
80Vca
16A resistive charge
250Vca
16A resistive charge
Control board dimensions 121 x 123 mm
Control front dimensions 100 x 100 mm
Temperature setting dimensions 45 x 35 mm, high: 35mm with handle included
Long cable in front of control 300mm
Long temperature setting cable 250mm