3
cleaning anD Maintenance
the machine does not require any special maintenance.
• regularly clean the ventilation slots.
• regularly was the polishing covers. Wash them by hand only and leave then to dry in the air.
• if you are not going to use the machine for an extended period of time, remove the polishing cover from the polishing wheel. Store
the machine with the polishing wheel pointing up.
technical Data
Mains voltage
hz
50
power input
W
120
polishing orbits
rpm
3100
Diameter polishing wheel
mm
240
Weight
kg
2.4
level of sound pressure measured according to en60745:
lpa (sound pressure)
dB(a) = 60
Weighted root mean square acceleration value according to en60745:
11.542m/s2
Safety inStructionS
important! When using electrical tools, the following safety instructions should be observed to prevent the risk of electric shock, personal
injury and fire. read and observe these instructions carefully before using the tool.
• consider work area environment. Do not expose power tools to rain. Do not use power tools in damp or wet locations. Keep work area
well lit. Do not use power tools near flammable liquids or gases.
• guard against electrical shock. prevent body contact with grounded surfaces (e.g. pipes, radiators, ranges, refrigerators etc.)
• Keep children away. Do not let visitors contact tool or extension cord. all visitors should be kept away from work area.
• Store idle tools. When not in use, tools should be stored in a dry, high or lock-up place, out of reach of children.
• Do not force tool. it will do a better job and operate more safely at the rate for which it was intended.
• Dress properly. Do not wear loose clothing or jewelry. they can be caught in moving parts.
• Do not abuse cord. never carry tool by cord or yank it to disconnect it from the wall outlet. Keep cord from heat and sharp edges.
• Maintain tools with care. Keep tool clean for better and safer performance. follow instructions for lubricating and changing acces-
sories. inspect tool cord periodically and, if damaged, have them repaired by an authorized service facility. inspect extension cords
periodically and replace if damaged. Keep handles dry, clean and free from oil and grease.
• Disconnect tool when not in use, before servicing, and when changing accessories.
• avoid unintentional starting. Do not carry plugged-in tool with finger on switch. Be sure that the tool is switched off before plugging
in.
• outdoor use extension cords. When tool is used outdoors, use only extension cords intended for use outdoors and so marked.
environMent
Should your machine need replacement after extended use, do not put it in the domestic waste but dispose of it in an environmentally
safe way.
1717304i.indd 3
01-03-10 12:46