To attach your brush or any head,
use the handy head tool with the
allen tool to hold the center plug as
you insert and tighten the two 3/8
bolts into your counterbalanc,Pic A.
Put the head tool into one of the
holes of the centerplug, Push in two
bolts and start then by hand, then
use the allen tool to tighten them, as
in picutre B
The speed of your Trinity is set by
which holes you use to attach your
different heads to the counterbal-
ance.
As you can see on the CB is a dia-
gram off which way the blue strip
on the centerplug must be posi-
tioned to run at the speed you want
to.
With the blue strip on the right, you
are in speed, same speed as other
CCS machines but still higher speed
than our competitors.
With the blue strip down, you are in
speed 2 or encap speed. Etc.
With the blue strip on the left, you
Changing the speeds for your Trinity
B
A
Page 8
