5.Menu interface operation
CALIBRATE BOAT COMPASS:Choose this menu and press the power button to enter
into the boat compass calibration interface.Press the power button again,the boat will
start calibration by turning around automatically in the water.When the calibration is
finished,the RC screen will exit from the calibration interface automatically.
1
Click the menu button (
▲/▼
)
to enter the menu interface, and set the menu with the power button
CALIBRATE RC COMPASS:Choose this menu and press the power button to enter into
the RC compass calibration interface.Press the power button again,turn around the
Remote control in 360 degrees and move the remote control up and down to calibrate the
RC compass.When the calibration is finished,the RC screen will exit from the
calibration interface automatically.
BOAT BATTERY:Choose this menu,then press the power button to enter into the boat
battery type interface.Press the “
▲
”
or “
▼
” button to choose the battery type,then
press the power button to confirm the selection.
PARING MODE:Turn on the boat,choose this menu and press the power button to enter
into the channel selecting menu.Press the “
▲
”
or “
▼
” button to choose the
channel,then press the power button to confirm the selection,the boat will start paring
with the RC(Make sure that the boat is switched on when paring).During paring,the boat
light will be flickering.When paring is finished(success or fail),the interface will stay
for 5 seconds and then jump to the main interface.
EXIT:Choose this menu,then press the power button to exit the menu interface.
2
3
4
5
User Manual of the Intelligent Remote
Control Bait boat
User Manual of the Intelligent Remote
Control Bait boat
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Icon description
Water depth
Water temperature
Number of GPS
Fish information
River bed information
GPS settings
Current latitude and longitude of the boat
Target point latitude and longitude
Boat status (STOP/MANUAL/AUTO/GPS)
The distance from the boat to the HOME point
The distance of the boat from the target point
Boat status indication
The position of the boat relative to the remote control
Remote control serial number and version information
Boat serial number and version information
Icons corresponding information
1. Press the “operation interface switching” button to switch between the GPS interface and the main
interface.
2.Click the menu button (
▲
/
▼
) to enter the menu interface, and select “EXIT” menu to exit the menu
interface.
Operation interface switching:
11
10
