Type
E-compass
GPS Navigation
Fish Finder
A
B
C
D
*
*
*
*
*
*
*
*
A). GPS Functions:
There are icons to show the direction,position and distance of the destination points.
You can set and store 31 GPS locations (“HOME”is the departure point and 1-30 are the destination
points).
The boat can sail automatically using the GPS system between the preset locations.
The boat will return automatically to the departure point in cases of remote control battery outage or
communication outage(You must set “HOME” as the departure point at first.It is recommended that
“HOME” be set to the nearest location to the operator.).
Calculate and show the straight-line distance between the departure point and the destination of the boat.
The front and back lamp of the boat will flash and the remote control will make audible tones when the
boat reaches the destination.
B).GPS operation instructions:
a).Press the“Operation interface switching”button to enter into the GPS interface,there are 31 numbers to
select for the GPS locations.(“HOME” stands for the departure point,and the number “1-31” stands for
the destination points.)
b).Before operation,please wait for 3 minutes until the satellites number reach to 5.
c).Press the “-/+” button to move the cursor,then press the “SET” button to set the selected number as the
GPS locations. If you want to remove the GPS location from the selected number,you can press and hold
the button “SET” for 3 seconds.
d).Press the button “GO” to make the boat sail under GPS navigation.If the boat is sailing in GPS mode,
you can press this button again to exit from GPS sailing.
e).Press the button “ESC”or the“Operation interface switching”button to exit from the GPS interface.
2. GPS Satellite Navigation
*
*
*
*
*
*
User Manual of the Intelligent Remote
Control Bait boat
A) Main Functions:
Detect the riverbed contours, water temperature,water depth and the fish situation on a real-time basis.
Equipped with underwater automatic power switch,the power switch of boat will be turned on once the
boat is in the water.
Equipped with attracting fish lamp,the boat can attract fish at night.
The detection of water depth is of 4 levels: 2-5 meters, 5-15 meters, 15-20 meters, and 20-30 meters.
There icons of fish size can be displayed: big, medium, and small.
The sensitivity of fish detection is of three level: C1/C2/C3 from low to high.
Indicate the actual contour of the riverbed.
Warning tones of finding fish:when there is fish in the water,the remote control will make warning tones.
B) Check the Working Status of the Fish Finder:
The fish finder is working well if the water temperature indicates the current temperature of the
environment.
Put the probe(at the bottom of the boat) 60 centimeters away from the ground, if the remote control
indicates the distance of 3 meters and there is a bold line, it means that the fish finder is working well.
Notes:
The fish finder can only work in the water, and it will make mistakes if it’s used on the land. It will recover
if it’s put back into the water.
The fish finder only works in the water deeper than 2 meters.
3. Fish Finder
The charger has LED charging indicators. A red light indicates battery is being charged, and after the
charging is completed, the red light will turn green to indicate battery is fully charged.
A) The charger of boat :
Take the batteries out of the boat or remove the battery cover on the boat, connect the charging
conversion plug with the batteries and the charger, and connect the charger to the power supply.
B) The charger of the remote control handset:
Insert the charging plug of the charger into the charging USB interface of the remote control handset,
and connect the other end with the power supply.
User Manual of the Intelligent Remote
Control Bait boat
4. Charger
*
*
*
*
*
*
*
*
*
*
*
*
03
02
