Carolina Cooker
®
11
Model M56913
844-478-4334
January 2018
2.
ON
Open the LP cylinder valve.
3.
ON
Use a long match or spark igniter and
slowly open the shut-off valve until the
burner lights.
4. Adjust the burner flame using the shut-off valve.
WARNING
If the burner does not light within
five seconds, first close the shut-
off valve and then close the LP cylinder valve OFF.
Wait five minutes for fumes to diminish before
relighting.
5. After the burner is lit, open the shut-off valve
until the flame is at least 5 inches high.
6. Use the air flow control bolt on the burner to
adjust the flame until it turns blue. Adjust the air
flow bolt by hand to either increase or decrease
the amount of airflow.
Note:
A flame height of less than five inches will not
produce the blue color when properly adjusted.
7. If the burner flame does not burn blue, check
the burner venturi for obstructions. Dirt daubers,
spiders, and other insects will build nests blocking
air and gas flow.
8.
OFF
After each use, close the shut-off valve
first; then close the LP cylinder valve.
Always allow the appliance to cool
completely before touching or moving it.
Note:
Due to the intense heat from the burner, it
is normal for discoloration to occur on the appliance
during the first few uses.
9. Disconnect the LP cylinder from the appliance
when it is not in use.
10.
OFF
The shutoff valve and the LP cylinder
valve should both be in the OFF or
closed position.
11. Close all gas valves and disconnect the LP cylinder.
12. Replace the protective LP cylinder cap when the
tank is not connected.
