16
Carolina Cooker®
844-478-4334
Model M52509, M59541, M64556, & M64557
February 2022
To prevent damage to fittings or
burner assembly when tighten
-
ing connection, hold the body of the fitting with one
wrench while tightening the swivel portion with the
other wrench. Do not tighten the connection using a
8. Attach regulator hose assembly (8) to tube
assembly (9c).
To prevent damage to fittings
and or burner assembly when
tightening connection, hold burner fitting with one
wrench while tightening supply hose fitting with sec
-
ond wrench. Do not tighten connection using a single
6. Once all the connections have been made, tighten
the tubing assembly securely by placing one wrench
over the square portion of the 90 degree elbow and
tightening the swivel hex portion of the fitting with
the second wrench.
7. Securely tighten the burner hardware that was
previously loosened.
9. Place vats (5a and 5b) in the base and place
baskets (4a and 4b) into the vats.
This appliance was not designed
for, and should not be connected
to a natural gas supply line.
Never use a cooking vat or other
vessel that does not correctly fit
or is properly suspended inside the base (frame) of the
appliance.
10. Connect LP cylinder as described in section “6.2
Connecting the LP Cylinder” on page 18.
11. Perform the Soapy Water Test, as described in
section “6.3 Soapy Water Test” on page 18.
12. Follow the safety and cooking guidelines, as
described in section “6. Operation” on page 17.
WARNING
!
WARNING
!
NOTICE
NOTICE
