4
www.CarnivalKingSupplies.com
.
||||| [email protected]
nacho cheese dispenser
Installation Instructions
After unpacking, check thoroughly for any damage which may have occured in transit. Claims should be filed
immediately with the transportation company. The warranty does not cover damage that occurs in transit, or damage
caused by abuse, or consequential damage due to the operation of this machine, since it is beyond our control.
Setup
Your new cheese dispenser is completely assembled and tested at the factory. Remove all packing material before
starting operation.
Electrical Requirements
CD225: 120V, 225W, 60Hz
Your electrician must furnish sufficient power for proper machine operation. We recommend this equipment be on
a dedicated and protected circuit. Failure to wire properly will void the warranty and may result in damage to the
machine. It is recommendation that this machine be plugged directly into a wall outlet. The use of extension cords is
not recommended due to safety concerns, and may cause sacrificed and/or reduced performance.
Before You Plug In Machine
1. Make sure all machine switches are in the OFF position before plugging the equipment into the receptacle.
2. Make sure the wall outlet can accept the grounded plugs (where applicable) on the power supply cord.
3. The wall outlet must have the proper polarity. If in doubt, have a competent electrician inspect the outlet and
correct if necessary.
4. DO NOT use a grounded to un-grounded receptacle adapter.
5. Install the unit in a level position.
