11
10
EE4
Half-piece or torn banknote.
Left/right counting sensor
Remove and press "RESET" to
continue counting.
Clean dust off sensor/ Replace sensor
EE5
Banknotes do not feed into the
machine smoothly, or banknotes
are not coutned accurately.
Adjust the feeder according to
instructions on page 9.
EE6
Counterfeit or suspicious banknote.
Banknote without or with low MG
feature.
Remove and press "RESET" to continue
counting. If the machine stops frequently,
adjust the sensitivity level.
EE7
Banknotes are not fed correctly into
the feeder.
Arrange banknotes according to
instructions on page 5.
EE8
Feeding board is not in the horizontal
position or banknote length not within
the range (110-180mm)
Adjust the position of the feeding board.
EE9
Feeding board is not in the horizontal
position or banknote width not within
the range (50-85mm)
Adjust the position of the feeding board.
EEA
Some banknotes are glued together.
Remove and press "RESET" to
continue counting.
EEB
Some
banknotes
are
broken
Remove and press "RESET" to
continue counting.
1.If operated at temperature below 68
F
(20
℃
), please allow three minutes for
warm-up.
2.The machine must be operated in a well-ventilated area. Keep it away from
direct sunlight and strong magnetic fields.
3.Do not apply oil to machine’s rubber parts, as it may cause malfunction.
4.Clean all sensors and magnetic head at least once a week with a soft brush .
Maintenance
