Carmelli NG1022M Скачать руководство пользователя страница 6

Страница: 6 / 18

Assembly Tips

Make sure you understand the following before you begin to assemble your game table.

1. READ THIS MANUAL all the way through before beginning assembly.

2. When installing parts that have more than one bolt, start ALL bolts in that part by hand

before tightening anything.

3. Some drawings or images in this manual may not look exactly like your product.

4. You may need a second adult to assist with this assembly.

Note:

Save all packing materials until the parts have been inspected and the table is

assembled.

Unpack the Pieces

•

Lay the box on a flat surface (floor). You may want this near your
area of assembly.

•

Unpack the boxes and part bags. Inspect and count the parts. The
Parts Identifier page can be used to record your results.

•

If any parts are damaged or missing, contact Customer
Service.

•

Missing fasteners may be purchased at a hardware store using the
descriptions on the Parts Identifier pages.

Games

This game table includes the equipment and game pieces for Air Hockey, Pool and Table
Tennis. The rules for these games are not discussed in this manual.

3 in 1 Game Table

Содержание NG1022M



















Результаты поиска

Содержание NG1022M

Отзывы:

Похожие инструкции для NG1022M

Бренды по названию

Популярные бренды

Carmelli NG1022M, Инструкция по сборке

Результаты поиска

Содержание NG1022M

Отзывы:

Похожие инструкции для NG1022M

Бренды по названию

Популярные бренды