Carmanah R820, Руководство пользователя

Страница: 14 / 18

Owner’s Manual | Model
R820
Carmanah Technologies Inc. Copyright © 2006
Document number: MAN_ROAD R820 Owner's Manual 36983_vB
Last revised: November 7, 2006
14
5. Attach the button wires from the solar engine to the button contacts. This is the long
harness with the two ring terminals.
3.5.3
Mount the Solar Engine
Two installers without the use of a bucket truck can complete the
final step in the installation of the R820.
Note: If you are using a 4” OD pole, you will need longer bolts than
those provided.
1. Simply attach the Solar Engine to the pole and finger-tighten
the bolts.
2. Next, using two installers, stand the pole up and set onto the
mounts.
3. Bolt the pole to the mounting hardware already poured in the
concrete base.
4. Position the Solar Engine so that the unit achieves maximum
solar power generation by angling the solar panel towards
the equator and tipping it upwards at an angle equal to the
latitude of the
geographical location
of the installation plus
5 degrees. (For
example, Seattle, WA
would require that the
solar panel point
south at an angle of
54 degrees up from
the horizon (49 degrees Latitude plus 5
degrees)).
Figure 24: Button Figure 25: Button Plate
Figure 26: Solar
Panel Assembly
Figure 27: Pole
Installation
Tilt the Solar
Engine
Rotate the
Solar Engine
on the Pole
Figure 28: Adjusting the Solar Engine so that
the Solar Panels Face the Equator