Carman AUTO-i 700, Руководство пользователя, Страница: 67 / 92

AUTO-i 700
67
Chapter 7: OBD-II/EOBDDiagnosis Menu
2. How To Connect Diagnostic Connector and Select Diagnosis Program
(It is common to Korean, Japanese, European and USA vehicles)
1. Locate the diagnostic connector in the vehicle.
- Most OBD-II vehicles have their diagnostic connectors on the section over
the brake pedal under the steering wheel. (OBD-II Diagnosticconnector location)
- Since vehicles without the OBD-II diagnostic connector do not conform tothe
OBD-II/EOBD communication protocol, you can not use the OBD-II/EOBD vehicle
diagnosis function to them.
- OBD-II Diagnosticconnector location -
2. Use the diagnosis cable to connect the vehicle's diagnostic connector and
AUTO-i 700
3. Turn on AUTO-i 700.
- As OBD-II vehicles feed power through the diagnostic connector to the
module, they do not need any additional power supply..
4. Press the OBD-II/EOBD button on main screen of AUTO-i 700 to see diagnosis items.
5. Diagnosis function includes Auto-searching, ISO9141-2/KWP2000, J1850PWM/J
1850VPW, CAN communication(Figure 5-1) etc. please refer to Chapter 8 OBD-II
Vehicle Diagnosis for more information.
Whenever performing diagnosis, make sure that the ignition
switch is in the "ON" position. If the ignition switch is placed in the "OFF"
position, power cannot be feed to the ECU and the diagnosis with AUTO-i 700
cannot be performed.