Carman AUTO-i 700, Руководство пользователя, Страница: 42 / 92

AUTO-i 700
42
Chapter 5:Diagnosis Menu
1. How To Connect Diagnostic Connector and Select Diagnosis Program
(It is common to Korean, Japanese, European and USA vehicles)
1. Locate the diagnostic connector in the vehicle.
- Most vehicles released after year 2002 conform to the OBD-II Protocol and
have OBD-II diagnostic connectors.
- Most OBD-II vehicles have their diagnostic connectors on the section over the
brake pedal under the steering wheel.
- If an additional adaptor is required, the scanner display shows the type of the
necessary adaptor and the location of the diagnostic connector.
-Location of OBD-II diagnostic connector-
2. Use the DLC main cable to connect the vehicle's diagnostic connector and AUTO-i 700.
3. Turn on AUTO-i 700
-If power is not feed through the diagnostic connector and the AUTO-i 700
battery is not fully charged, you need to connect an additional power supply
(vehicle battery or cigarette lighter power cable, etc.).
4. Select a kind of vehicle.