Carlton CPA 10000, Инструкция по эксплуатации, Страница: 4 / 8

Connecting your air conditioner
........................................................................
This unit is portable and can be removed from room to room
i
Information
Do not use any other
accessories other than
those supplied.
Always try to use the
exhaust hose at its
shortest length.
Take care not to bow
or bend the middle of
the exhaust hose as
this will trap hot air
and may cause the
unit to shut down.
Important:
Duct Mount Instructions:
A) Temporary
B) Permanent
1. Attach one end of the duct to the exhaust air outlet of the
mobile air conditioner. According to the arrow direction,
first fit the left side of the duct on the exhaust air panel,
then the right side duct. Push it downwards, be sure to fix
thoroughly.
2. Install the adaptor A onto the wall by using 4 wall plug and
screws, be sure to fix thoroughly. (See the fig.9)
3. Attach the other end of the duct to adaptor A.
4. Cover the hole using the adaptor cap when not in use.
1. Attach one end of the duct to the exhaust air outlet of the
mobile air condition, first fit the left side of the duct on the
exhaust air panel, then the right side duct. Push it
downwards, be sure to fix thoroughly.
2. Attach the other end of the duct to adaptor B.
3. Put the end of duct to a nearby window.(See the fig.8)
-The duct can be compressed or extended between 500mm
and 2000mm, but it is desirable to keep the duct length to a
minimum.
-Install the mobile air conditioner in a flat
and spacious location where the air outlets
will not be covered up.
-A minimum clearance of 30cm from a wall
or other obstacles should be kept.
-The plug shall be accessible after appliance is positioned.
-Wiring shall be done according to National rules.
Your window kit has been designed to
fit most standard Vertical and horizontal
window applications, However, it may be necessary
for you to improvise/modify some aspects of the
installation procedures for certain types of window.
Please refer to Fig. 11 & Fig. 11a for minimum and
maximum window openings.
Window Kit Installation
Horizontal
window
Window Slider Kit
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
Window Slider Kit
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
Horizontal
window
Adapter A
Rawlplugs
max 120CM
min 30CM
30cm
30
cm
........................................................................
Fig.11
Fig.11a
Fig.8
Fig.9