Carlton CC3040, Руководство пользователя, Страница: 4 / 14

4
Dermavisage
Operating Instructions
Installation And Preparation For Use
Unpack the unit before first use, and check you have everything listed on
the Packing List.
The unit is shipped to you ready for use.
The Handpiece:
This consists of the following components: - Plastic Treatment Tip - Crystal
Nozzle – Handpiece Body – Tubing (Clear & Black)
Before use, the tubing will need to be attached to the front of the unit.
When fixing the Handpiece and tubing to the unit, ensure Tube 1 and
Tube 2 are lined up with the corresponding outlet on the front of the
DermaVisage, and push firmly into place using a slight twisting action.
Turning the DermaVisage on:
Turn the DermaVisage on via the Green On/Off switch at the back of the
machine. The Crystal Peel Selector Button on the front of the machine will
illuminate red. Press the Crystal Peel Selector Button, and the button will
change from red to green.
Diamond Peeling Selector
Diamond Peeling
Intensity Dial
Diamond Peeling
Directional Rotation
Switch
Outlet for Diamond Peeling
Handpiece
Colour Therapy Selector Button
Outlet for Colour
Therapy Applicator
Vacuum Suction
Intensity Level
Crystal Peeling
Selector
Crystal Peeling Vacuum
Suction Intensity Dial
Outlet for
Tube 1
Outlet for
Tube 2
Crystal Dispensing Canisters

Treatment Tips:
To operate, a plastic
treatment tip must be
attached to the working
end of the Handpiece. To
attach, simply push the tip
firmly into place using a
slight twisting action. These
should be disposed of after
each treatment.

The Crystal Peeling (8),
Diamond Peeling (1) and
Colour Therapy (5) Selector
Buttons all incorporate a
“Switching Delay” . When
pressed the buttons will
only change from On to Off
(and vice versa) if 3 seconds
elapse between each press
of the button.