▲
▲
15
Displaying of the variables
Input programming
13
Load profile
8
19
16
To reset all the events press the
key, to continue the
reset procedure press the
key again: to exit from the
reset procedure press the
key.
❑
Pass "999": display of energy consumption storage
(Only if the RS232+RTC is present)
The RS232+RTC module allows the user to display the storage
of the energy consumption of the previous two months. To enter
this function, press the
key in any one of the measuring page
(excluded the “load profiles”),
when the instrument asks for the
pass code
,
set the value “999”: the instru-
ment shows you the page where
the energy values are stored.
Use the
and
keys to display the partial values;
press the
key to exit.
F
▼
▲
S
F
S
S
Control type:
alarm (e.g.: A2),
diagnostics (e.g.: D1),
maximum value (MAX),
minimum value (MIN).
Only for alarms and diag-
nostics: detection of the
abnormal condition (ON) or
return to the normal condi-
tion (OFF)
Variable being
controlled.
Alarms: value of
the ON alarm;
Max and Min log-
ging: maximum
and minimum
measured values.
Time of the
event.
Date of the
event.
