CARLO GAVAZZI SBPVBE, Руководство пользователя

Страница: 15 / 23

Videobox
– User manual
15
Network design
The IP cameras can be connected to the SBPVBE videobox by using network devices, such as:
Device Description
Ethernet switches
The SBPVBE are connected to the same LAN network by using
Ethernet switches.
W-LAN adapters
The SBPVBE are connected to the same LAN network by using W-
LAN adapters.
To connect the webcams mounted on other poles to the main pole
where the SBPVBE is installed
The number of network devices such as Ethernet switches or PoE adapters (and
SBPVBE videoboxes) depends on the parking area to be monitored and on the IP
cameras needed to cover it.
Below general guidelines are proposed to help the installer to calculate the number of required
network devices.
Things to know
One or more Ethernet switches are required to connect one or more SBPVBE videoboxes to
one or more IP cameras on the LAN network. The LAN network must have
Internet access
and a DHCP Server . If a LAN network is not available, a 4G/LTE router must be used (the
router and the SIM card are not included).
Recommended Ethernet switches specifications
The table below shows the recommended Ethernet switches specifications:
Feature Specification
Port Standards IEEE 802.3, TCP/IPv4, TCP/IPv6
Interface 100/1000 Mbps port, RJ45 connector
Number of ports
According to the number of devices (videobox, IP cameras) that have to
be connected in the same cabinet
Switching capacity See paragraph below
PoE
IEEE 802.3at-compliant
Note: For Power over Ethernet (PoE) ports to supply the IP cameras,
the installer has to consider switches that support this technology, so
that a single UTP/STP Ethernet cable can be used for power supply
and data